Simple setup 220 Single Phase to 440 Three Phase and Maintain 5160 watts for my Miner

[dhammon21]

Hello, I am finding some information and was looking for some help. I currently am running a miner that is on 220-240v single phase but I can step it up with the original power supply to 440-460v three phase. I have a 200 amp service and was looking for an affordable way to do it. I see some suggest convertors, some suggest control transformers ...... just asking the forum for some help without breaking the bank and burning down the house. I need to have a steady 5160watts to have the maximum output I am looking for on the machine.

Thank You
Dave

 

[Jraef]

This is not a DIY site. I suggest posting this in https://www.practicalmachinist.com/forum/categories/transformers-phase-converters-and-vfd.11/


I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the Report Button at the lower left hand corner of the post