SINGLE FAMILY SERVICE
- Thread starter stevecbr
- Start date
- Status
websparky
Senior Member
- Location
- Cleveland, Ohio
Re: SINGLE FAMILY SERVICE
Do you mean the overhead conductors?
Do you mean the overhead conductors?
websparky
Senior Member
- Location
- Cleveland, Ohio
Re: SINGLE FAMILY SERVICE
No limit.
No limit.
jwelectric
Senior Member
- Location
- North Carolina
Re: SINGLE FAMILY SERVICE
240.24 Location in or on Premises.
(A) Accessibility. Overcurrent devices shall be readily accessible and shall be installed so that the center of the grip of the operating handle of the switch or circuit breaker, when in its highest position, is not more than 2.0 m (6 ft 7 in.) above the floor or working platform
240.24 Location in or on Premises.
(A) Accessibility. Overcurrent devices shall be readily accessible and shall be installed so that the center of the grip of the operating handle of the switch or circuit breaker, when in its highest position, is not more than 2.0 m (6 ft 7 in.) above the floor or working platform
websparky
Senior Member
- Location
- Cleveland, Ohio
Re: SINGLE FAMILY SERVICE
I agree. There should be a minimum height requirement.
I agree. There should be a minimum height requirement.
physis
Senior Member
Re: SINGLE FAMILY SERVICE
And it took 9 posts in the other thread for someone to mention a panel associated code was in 240. And Iwire was the guy, and he already knows that one.
But I'm being good and not saying anything.
Edit: I had to change Bob to Iwire cause there were two Bobs.
[ August 11, 2005, 06:15 PM: Message edited by: physis ]
And it took 9 posts in the other thread for someone to mention a panel associated code was in 240. And Iwire was the guy, and he already knows that one.
But I'm being good and not saying anything.
Edit: I had to change Bob to Iwire cause there were two Bobs.
[ August 11, 2005, 06:15 PM: Message edited by: physis ]
- Status