- Location
- New Jersey
- Occupation
- Journeyman Electrician (retired)
If I have a 208 volt, 60 amp feeder in a grounded 1" EMT and I decide to pull in a EGC must it be sized according to 250.122 or could it be any size since it's not required.
Sizing an EGC when not required
- Thread starter infinity
- Start date
- Status
ryan_618
Senior Member
- Location
- Salt Lake City, Utah
Re: Sizing an EGC when not required
It must be properly installed and sized.
It must be properly installed and sized.
- Status