Sizing generators for motor loads

[mikehughes8]

I have just made an Excel sheet that automatically calcualtes the generator size needed to power a load with multiple motors. I wanted to post the spreadsheet to get opinions but am unable to. Can anyone assist me with this. Thanks

 

[Buck Parrish]

Have you tried useing photo bucket ? Remember the url number, too.

 

[mikehughes8]

Ok...I think I found away to do this.
Here's the link if anyone wishes to critique my spreadsheet. I think most of it is self-explanatory. I still have to work out away to determine generator size when the load is a combination of 1-phase and 3-phase motors.

Need Excel 2007 to view (click on View My Site on upper right then Motor Load link to open)

http://mikehughes8.embarqspace.com/...30d0d5b850c704c9f5&cookie=y#/links/4531651719

 

[nafis]

unable

unable

unable to see what you post . BTW not every body has Exc 2007

 

[bob]

I misread you message. Cancel my comments.

 

[Besoeker]

unable to see what you post .

Nor could I.