Soffit lighting control from Malibu power?

[Mark S.]

I have Malibu 24VDC lighting around the house. The Malibu 300W power pack has a photocell and timer.

Questions:

1. Is there any NEC code issues if I use the 24VDC to energize a lighting contactor for the 120VAC soffit lighting?
2. Is a lighting contractor required, or is any 120VAC relay (of 20A rating) ok? Open frame required?
3. Is there any enclosure requirement for this contractor/relay or is any NEMA 1 box ok (this is going in the garage).

I have the soffit wiring almost complete and need direction.

Thanks

 

[George Stolz]

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.

A reminder to all members, if you see a questionable post, feel free to report it by clicking the

button at the top right corner of the post.