solid aluminum wire

Status
Not open for further replies.

Esthy

Senior Member
A home inspector stated that a solid aluminum 10, 12,and 14 AWG cannot be install in a breaker in a subpanel. Is him correct?
 
If a home inspector said it, it HAS to be true......... :p :wink:

Seriously, aluminum NM isn't around anymore, so I guess it could be said that it can't be installed. Any alauminum wire that is out there is perfectly fine to be left alone but should be thoroughly inspected by an ELECTRICIAN familiar with aluminum wiring to be sure that it is terminated properly on the right devices.
 
Status
Not open for further replies.
Top