sparky

[mrmasterman]

Hey can you pass your switch legs from a lighting contactor through a panel board.

 

[George Stolz]

I'd say yes.

 

[tonyou812]

you see it done for mechanical time clocks all the time. I dont see a problem with it

 

[infinity]

Yes it's permitted by 312.8. If you don't run the switch legs through the panel you'll need to run the neutrals through the controller unless you have a junction box in between them. Here's a lighting controller with the neutrals passing through from the panel:

 

[chris kennedy]

Rob, is that a Z-Maz?

 

[dcspector]

Rob...your work? B.E.A. utiful.

 

[GSXR600]

Maybe i dont understand the question but wouldnt that be condsider using a panel as a raceway

 

[dcspector]

Maybe i dont understand the question but wouldnt that be condsider using a panel as a raceway

You still can if 312.8 is met. See post #4 from Rob.

 

[infinity]

Rob, is that a Z-Maz?

It's called Smart Switch by Unison. Here's some more info if you're interested:

http://www.etcconnect.com/minisite/unison/docs/SmartLink_Brochure_vB.pdf

Rob...your work? B.E.A. utiful.

Actually one of my guys did it. I agree he did a nice job. :grin:

Maybe i dont understand the question but wouldnt that be condsider using a panel as a raceway

Yup, it's permitted as per 312.8.