Specific Kohler generator question

[rfcomm2k]

I have a Kohler model 5MM65, Spec 87550A portable generator and needed to replace the flash circuit capacitor. I disassembled it, removed the old cap, found a replacement. Then, I injured my shoulder, had to have surgery, and by the time I got back to it I have forgotten where 2 of the wires go.

I believe they both attach to the flash switch because the wires both have push on connectors and the switch has 2 poles that have no wires on them. However, I want to be sure.

I have an owner manual but the photos in it are not clear enough to show the detail I need. And the schematic provided does not show enough detail either.

Does anyone out there own the same model and could take a close up photo of the back of the switch and flash circuit board so I could trace the wires?

 

[jumper]

I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.


If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.