Speed controller, 120v motor

Status
Not open for further replies.
J

JES2727

Senior Member
Location
NJ
Hello,
I'm seeking suggestions or ideas on ways to automatically control the speed on a small 120 volt motor. I need the motor to ramp up to full speed once the start button is pushed, run at full speed for a pre-determined time period, and ramp down to stop. I have been unable to locate a VFD with a 120v single phase output. There must be other products or methods available to meet my needs.
Thanks for any help...

John
 
Are you really talking about a 120V induction motor or a universal motor that one may find in a vacuum cleaner or drill?
If you are controlling a universal motor, a DC supply may be the way to go. Also, do you want to be able to control the ramp rate?
What motor hp range are we talking about?
 
plate said:
Are you really talking about a 120V induction motor or a universal motor that one may find in a vacuum cleaner or drill?
If you are controlling a universal motor, a DC supply may be the way to go. Also, do you want to be able to control the ramp rate?
What motor hp range are we talking about?
Click to expand...

Yes, I'm really talking about a 120V induction motor, the kind found in paint shaker machines, just like at HD. Except the customer isn't shaking paint, they want to modify it for use in a research lab. However, the shaking action is too vigorous and the flasks break at startup. I don't think the ramp rate is critical.
It looks like the link provided by my friend in Maryland may be just what I need. Thank you.

John
 
Status
Not open for further replies.
Top