fishtape
Member
- Location
- Piedmont, N.C.
- Occupation
- Electrician
I have looked at a job that that in my opinion would be best accomplished by installing a junction box in a driveway at an rv dealership. This is not a main driveway but could be used on an intermittant basis. I am looking at tier 15 Quazite boxes from Hubbell. I have a call in to a territory sales manager (not sure if he is the right contact} can anyone shed any light on this subject?
There was a gate installed in a fence to make a new entrance that has a pole right in the middle of the opening that has 3 conduits that supply power to a propane fill station, an emergency shutoff as well as 120v service receptacle. AHJ is requiring the emergency shut off be rerouted to new location which would be a fourth conduit added. I'm trying to avoid digging up the whole parking lot. Any knowledge would be appreciated.
There was a gate installed in a fence to make a new entrance that has a pole right in the middle of the opening that has 3 conduits that supply power to a propane fill station, an emergency shutoff as well as 120v service receptacle. AHJ is requiring the emergency shut off be rerouted to new location which would be a fourth conduit added. I'm trying to avoid digging up the whole parking lot. Any knowledge would be appreciated.