M midget Senior Member Dec 21, 2004 #1 What's the rules on Low Voltage splices? Do they have to be in a box? Do they have to be accssible, etc?
What's the rules on Low Voltage splices? Do they have to be in a box? Do they have to be accssible, etc?
ryan_618 Senior Member Location Salt Lake City, Utah Dec 21, 2004 #2 Re: Splices? It depends on whether or not it is a class 1,2 or 3 circuit.
M midget Senior Member Dec 21, 2004 #3 Re: Splices? Thanks for pointing me in the right direction...I'll do some research, and most likely, come back with some more specific questions.
Re: Splices? Thanks for pointing me in the right direction...I'll do some research, and most likely, come back with some more specific questions.
ryan_618 Senior Member Location Salt Lake City, Utah Dec 21, 2004 #4 Re: Splices? Take a look at article 725, but remember that (as per 725.3), article 300 doesn't apply unless specifically referenced. In other words, look for references to 300.15
Re: Splices? Take a look at article 725, but remember that (as per 725.3), article 300 doesn't apply unless specifically referenced. In other words, look for references to 300.15
bensonelectric Senior Member Jan 12, 2005 #5 Re: Splices? Depends on where it is too. Like they have nifty wire nuts for direct-burial low voltage stuff...
Re: Splices? Depends on where it is too. Like they have nifty wire nuts for direct-burial low voltage stuff...
physis Senior Member Jan 13, 2005 #6 Re: Splices? Actually those are "Yukkie" wire nuts. Just kidding, I hate oil or grease on my fingers.
Re: Splices? Actually those are "Yukkie" wire nuts. Just kidding, I hate oil or grease on my fingers.