Splicing a MV cable

[FaradayFF]

Hi guys,

I need to intercept existing medium voltage cable with a pull box. How easy would it be to splice the cable in the PB and extend it further to a new location?
I think it would come down to contractor having proper training on how to do so. Water egress into a pull box is not a concern in this particular installation.

Thanks,
EE

 

[Hv&Lv]

25PCJ1G1210; Elastimold 25kV Power Cable Joint - Northern Power

The 25PCJ1G1210 is an Elastimold 25KV Power Cable Joint, Style 1 with Single Piece Housing, Cable Insulation Diameter 0.760 inch to 0.950 inch.

www.northernpower.net

unbelievably easy, if you know how.
And have the right tools.
3 splices, less than an hour.

 

[sameguy]

Easy, depending on how facilities will let you do it and what documents, inspections are needed.
3 in less than an hour? Depending on type of cable, didn't look at the link but only see butt splice and ? cold epoxy cover no gnd/shield connection.