QES
Senior Member
- Location
- California
know where I can find a submersible splice box rated for a ~2 inch cable?
Submersible Splice Box
- Thread starter QES
- Start date
- Status
Rampage_Rick
Senior Member
- Location
- British Columbia, Canada
"Applications include enclosures ... in harbours with cameras inside to count fish"
There's a joe-job if I ever heard one.
There's a joe-job if I ever heard one.
weressl
Esteemed Member
QES said:
I don't know what is the cable type in question or what depth of water you have in mind, but standard heat shrink cable splice kits may work for you, such as Tyco/Raychem.
QES
Senior Member
- Location
- California
Looking at about 3 feet of water. The cable+conductors must be watertight.
weressl
Esteemed Member
QES said:
Heatshrink should work. Look for the type that has a sealing compound pre-applied inside for the outer, final sleeve. Use regular heat shrink for the individual conductors with either braised/soldered connection or compression barrel lugs. If it is a critical application they will give you engineering advice. Make sure what - if any - chemical exposure can be expected and that you take that into consdieration.
- Status