Survey- what do you use? Crimp street light fuses

[wyreman]

What crimper?
http://www.cooperindustries.com/con...t-datasheets-a/Bus_Ele_DS_2127_HEB_Series.pdf

My Ratcheting crimpers too small for #8 wire
#10-22
Klein 2006 too big
#6-4/0

And I prefer ratching instead of old style
http://www.tnb.com/ps/fulltilt/index.cgi?check=Y&part=WT111M
I can’t find a ratcheting crimper that goes #8


What do you use?

 

[Cow]

I keep a Burndy MRC840 on the truck. #8-4/0.

EDIT: It looks like the cordless Burndy 4 point dieless crimper we have will also go down to #8. I didn't know that....we always saved it for the bigger stuff.

 

[infinity]

We use these great kits from Burndy. You can buy the tools separately.

https://www.hubbell.com/burndy/en/P...s-Accessories/Mechanical/Y122CMRKIT/p/1649209

 

[Cow]

I forgot about those crimpers Rob, that'd be perfect for what he's doing.

On a sidenote, what are those 2 hole crimp lugs right below the ratcheting mechanism for? I've seen them around, but can't say I recognize the hole size and spacing on any piece of equipment I've ever worked on?

 

[jumper]

I forgot about those crimpers Rob, that'd be perfect for what he's doing.

On a sidenote, what are those 2 hole crimp lugs right below the ratcheting mechanism for? I've seen them around, but can't say I recognize the hole size and spacing on any piece of equipment I've ever worked on?

Rob's link has a parts list.

https://hubbellcdn.com/salesdrawings/50031228.pdf

 

[Cow]

Rob's link has a parts list.

https://hubbellcdn.com/salesdrawings/50031228.pdf

My question was, what type of equipment takes those kind of lugs? They have smaller holes and closer spacing than the typical 2 hole lugs with 1/2" on 1 3/4" centers most CT cabinets, MCC's, etc use.

 

[ptonsparky]

We use these great kits from Burndy. You can buy the tools separately.

https://www.hubbell.com/burndy/en/P...s-Accessories/Mechanical/Y122CMRKIT/p/1649209

We have a similar kit. One hole lugs only.

 

[infinity]

We have a similar kit. One hole lugs only.

Yes they also make a kit with single hole lugs and barrel type splice connector.

 

[donselectric]

My question was, what type of equipment takes those kind of lugs? They have smaller holes and closer spacing than the typical 2 hole lugs with 1/2" on 1 3/4" centers most CT cabinets, MCC's, etc use.

bus bars?

 

[electricman2]

Probably a dumb question but what is a street light fuse?

 

[Mgraw]

In line water tight fuse holders.

http://www.littelfuse.com/~/media/e...e_fuse_holder_inline_watertight_datasheet.pdf

 

[electricman2]

In line water tight fuse holders.

http://www.littelfuse.com/~/media/e...e_fuse_holder_inline_watertight_datasheet.pdf

Thanks.

 

[wyreman]

We use these great kits from Burndy. You can buy the tools separately.

https://www.hubbell.com/burndy/en/P...s-Accessories/Mechanical/Y122CMRKIT/p/1649209

Thank you