mastergasfitter
Member
what is the correct way which to perform a tap connection.
tap connection
- Thread starter mastergasfitter
- Start date
- Status
- Location
- Massachusetts
Re: tap connection
OK you can stop throwing things at me.
IMO A tap is made without breaking the original wire or run.
There are many different listed connectors available to do this.
Split bolts, H-Taps etc.
Hire an electrician?
OK you can stop throwing things at me.
IMO A tap is made without breaking the original wire or run.
There are many different listed connectors available to do this.
Split bolts, H-Taps etc.
electricmanscott
Senior Member
- Location
- Boston, MA
- Occupation
- Massachusetts Master Electrician, one man show.
pierre
Senior Member
- Location
- Westchester County, New York
Re: tap connection
Scott
your best link yet!!!!!!
Scott
your best link yet!!!!!!
mastergasfitter
Member
Re: tap connection
nice very nice but i dont drink for the effects.
it seems to me that i have been trying to hire an electrican but they are all a bunch of no nothing drunks. AA is worth looking into
nice very nice but i dont drink for the effects.
it seems to me that i have been trying to hire an electrican but they are all a bunch of no nothing drunks. AA is worth looking into
- Location
- Massachusetts
Re: tap connection
Not me.....I am a crackhead.
hurk27
Senior Member
- Location
- Portage, Indiana NEC: 2008
Re: tap connection
Then what do you drink for? :roll:
electricmanscott
Senior Member
- Location
- Boston, MA
- Occupation
- Massachusetts Master Electrician, one man show.
Re: tap connection
Should we be in the gas fitters forum asking questions we have no business asking? :roll:
Now lets see that plumbers crack.
Should we be in the gas fitters forum asking questions we have no business asking? :roll:
Now lets see
that plumbers crack.
- Location
- Windsor, CO NEC: 2023
- Occupation
- Hospital Master Electrician
Re: tap connection
Well, we could ask him how to build and use a water pipe, I'm sure he has experience along those lines as well.
If he has a mechanic friend, perhaps he could look at the carb.
Scott, that link almost made me fall outta my chair, good job.
I had to get my licks in before the thread went up in smoke.
Well, we could ask him how to build and use a water pipe, I'm sure he has experience along those lines as well.
If he has a mechanic friend, perhaps he could look at the carb.
Scott, that link almost made me fall outta my chair, good job.
I had to get my licks in before the thread went up in smoke.
pierre
Senior Member
- Location
- Westchester County, New York
Re: tap connection
My father taught me a long time ago that if you have nothing good to say, don't say anything!!!
My father taught me a long time ago that if you have nothing good to say, don't say anything!!!
Re: tap connection
It could be just my typical attitude
But, I think that hack electrical work is worse than hack plumbing work.
I would venture an unqualified guess (I am not a fire inspector) that more people escape from a house with a leaking water pipe safely, than escape from one burning down from an electrical fault.
And I drink for effect. I figure why go through the, constant bathroom visits, dry mouth, wife nagging, flatulance, and all, if I don't get to enjoy it.
It could be just my typical attitude
But, I think that hack electrical work is worse than hack plumbing work.
I would venture an unqualified guess (I am not a fire inspector) that more people escape from a house with a leaking water pipe safely, than escape from one burning down from an electrical fault.
And I drink for effect. I figure why go through the, constant bathroom visits, dry mouth, wife nagging, flatulance, and all, if I don't get to enjoy it.
- Status