Tenant allowed to do this

[hhsting]

I have note on tenant fit out drawings that says “Tenant shall verify by physical inspection the amp rating of the main electrical switch provided for the tenants electrical service connect”

Are tenant allowed to do this? I thought somewhere in NEC 2017 it required qualified personnel to do it.

 

[rc/retired]

Is the tenant a qualified person?

Ron

 

[jim dungar]

It looks like the specs are requiring the tenant to  provide you with information from a physical inspection.
The tenant could do it if qualified, or the tenant could hire a qualified person to get the info. In either case you do not need to include the cost of this task in your work, unless you convince the tenant to hire you to get the info.

 

[don_resqcapt19]

I thought somewhere in NEC 2017 it required qualified personnel to do it.

rules like that in the NEC are totally unenforceable.

 

[hhsting]

rules like that in the NEC are totally unenforceable.

Where is the rule in the NEC 2017?

 

[infinity]

I have note on tenant fit out drawings that says “Tenant shall verify by physical inspection the amp rating of the main electrical switch provided for the tenants electrical service connect”

Are tenant allowed to do this? I thought somewhere in NEC 2017 it required qualified personnel to do it.

How is this related to plan review?

 

[zbang]

Are tenant allowed to do this? I

Sure, why not? For most tenant breakers it's easier to read the rating that it is to reset (look at the handle, "Yep, that's a 200 all right."). What's the problem?

 

[charlie b]

A tenant fit out might be performed in anticipation of advertising the unit for leasing later in the year. There might not be a tenant yet!