The Troubles Between MOS GS Parallel Resistance and Diode

Status
Not open for further replies.

ling1995

Member
Location
beijing,china
Hi~friends,thanks for reading my thread! I am getting into hot water now and I need your help urgently!:?

Please look at the following picture,it’s the circuit I designed .The G of MOS input 14V, I don’t know what kind of diode is more suitable in here, And I would like to buy one from internet,I am fancy for this product.Because someone tell me it's excellent with a low price.But he also got this information from internet. So I would like to know do you have used it ?Could you give me some suggestions about it? Or do you have another excellent diode to recommend?

Your advice will be appreciated! Thank you in advance.
Wishes~

PS: I have uploaded my circuit,please have a look!
 

Attachments

  • 3.13.2.jpg
    3.13.2.jpg
    9.2 KB · Views: 0
Hi~friends,thanks for reading my thread! I am getting into hot water now and I need your help urgently!:?

Please look at the following picture,it’s the circuit I designed .The G of MOS input 14V, I don’t know what kind of diode is more suitable in here, And I would like to buy one from internet,I am fancy for this product.Because someone tell me it's excellent with a low price.But he also got this information from internet. So I would like to know do you have used it ?Could you give me some suggestions about it? Or do you have another excellent diode to recommend?

Your advice will be appreciated! Thank you in advance.
Wishes~

PS: I have uploaded my circuit,please have a look!
What is the circuit designed to do?
This fast recovery unit might do:

Vishay VS-ETX1506FP-M3 Fast Recovery Diode, 600V 15A, 45ns, 2-Pin TO-220FP
 
Status
Not open for further replies.
Top