Thermocouples

[wireday]

I have nice braided/shielded thermo couple wires. I would like to be able to to plug them into the control box. Does anyone know of a quality box connector? my control box is mounted to a wall and the machine needs to be rolled out of the way every now and then,meaning the thermo couplings wires would need to be disconnected from control box.

 

[petersonra]

something like this maybe

https://www.pyromation.com/Catalog/ac09.pdf

 

[wireday]

Is there a code section pertaining to TC's. I realize the the TC conductors need to be in separate conduits, They must be allowed in the same control box. Do I need a certain rated TC wire if its around the 120v controller in my control box?