THHN/NMB Wire run

[mr_andy]

I am running two new circuits for a dishwasher and bar.
My electrical panel is in the garage on the wall furthest from the house.

I plan to run up inside the wall from the panel. Then exit the wall and continue across the ceiling and down the opposite garage wall- and then into the crawl space and into the wet bar,

My plan is THHN from the panel inside the wall, and then into PVC conduit to cross the ceiling and come down the opposite garage wall. Then connect the THHN to NM-B In a box to cross the crawl space and enter the wall.

is this the right way to do this?

 

[Little Bill]

I would suggest you contact an electrician as we are not allowed to help with DIY projects.

I am closing this thread in accordance with forum rules. This forum is intended for use by electricians and electrical contractors, inspectors, engineers, and vendors with their job-related duties. We are not allowed to provide how-to advice to persons who are not employed in this industry, or persons who do not perform electrical installation or maintenance as part of their jobs. Engineers are welcome to participate, but only if their questions do not involve attempts to perform their own electrical installation, troubleshooting, or maintenance work.

If I have misread the situation, if for example you have an electrical contractor on board to perform the installation work, then send me a PM to explain the circumstances.

 

[tom baker]

Yes please hire an electrician. I bought a house that a DIYer had wired, scary to see. I ended with a total rewire. Insurance company was pleased.