Thomas and Betts

[Jerseydaze]

I'm trying to find a 20 A 2 pole GfCI rated for a T& B panel it looks like a BR but Br is not rated for panel and my supply house cant find one. On a side not its for a jacuzzi heater first time Ive seen a rezzi 240v jacuzzi Heater the pump is 120 glad I didnt run a 12-3. and checked first.

 

[peter d]

T&B is obsolete and no longer manufacturered. I think your only hope is a Classified breaker from Cutler Hammer.

 

[Jerseydaze]

My other thought is to do a 20 Amp 240 v dead front if there is such a thing.

 

[brantmacga]

GE breaker

 

[peter d]

GE breaker

Unless the GE breaker is a "Classified" breaker listed for use in T&B equipment, then it's not suitable.

But yes, we all know that a GE will fit and work just fine.

 

[SmithBuilt]

I have found this to be useful.

http://www.eaton.com/ecm/idcplg?IdcService=GET_FILE&dID=3046

 

[quogueelectric]

You could just use a spa panel and put it at the disconnect point 5 ft from the tub it has the gfp built in to the panel just feed it with a reagular breaker I think they are made by midwest and they come in 40 or 60 amp sizes but you could feed it with a 20 amp 2 pole.

 

[quogueelectric]

You could just use a spa panel and put it at the disconnect point 5 ft from the tub it has the gfp built in to the panel just feed it with a reagular breaker I think they are made by midwest and they come in 40 or 60 amp sizes but you could feed it with a 20 amp 2 pole.

I think they make a 40 amp version too http://www.lowes.com/lowes/lkn?action=productDetail&productId=105741-76863-UG412RMW260P