Threading Large RGS

[tkb]

Does anyone in Eastern MA know of a company that will thread pipe for you?

I am looking for someone to thread some 2-1/2", 3" and 4" rigid conduit nipples.

I have done some searches and came up with nothing.

It could be a pipe supplier, contractor or electrical contractor. It just needs to be someone that has the equipment setup in their shop and is willing to cut and tread some nipples.

I will supply the pipe or they could. Doesn't matter.

Of course they will get paid.

 

[big john]

I know of a place in Lowell, MA. If you can make that drive, PM me and I'll give you the number.

-John

 

[Cow]

Before we had a large threader, we used a local irrigation supply. Have any of those near you? Or try a plumbing contractor?

 

[tkb]

Never thought of an irrigation supply co.
I have tried a couple of plumbing and mechanical contractors but no luck yet.
I didn't want to try every contractor in the book though.

 

[WirenutNH]

Threading Large RGS

If you send me a private message we can discuss what you need to have threaded, We have a Ridgid bull head threader that can thread up to 4" Our shop is in Woburn Ma

 

[LarryFine]

You could also take your pipe to a tool rental place and see if they'll let you use the threader there at a reduced rate.

If not, just rent it anyway.

 

[Awg-Dawg]

I am looking for someone to thread some 2-1/2", 3" and 4" rigid conduit nipples.

Try plumbing supply houses.

 

[boboelectric]

Scott Electric.com?