storeytime
Member
- Location
- Texas
Customer provided transformer, 150 kVA, 3 PH, 480V. They're only using the secondary to provide power for two 200A, 1PH load centers. The actual amperage requirements of the two load centers combined is not more than 100A.
Secondary is 208/120 and feeds through a gutter and then out to the two load centers.
How would we hook up two phases off the secondary for the single phase load centers and maintain balance?
Secondary is 208/120 and feeds through a gutter and then out to the two load centers.
How would we hook up two phases off the secondary for the single phase load centers and maintain balance?