to enclse or panel

[billdozier]

Hey guys the panel Im discussing in another topic has 1-3in pvc pipe 2-2in pvc pipes and 1-11/2 pvc pipe coming into it outdoor style. In my opinion your basic nema3 225a panel will be a problem getting all of these pipes in the bottom of it due to lack of large knockouts or kos too close to one another if a ko punch is used. I sugested using a nema3 enclosure with no prefabbed holes in it and installing guts to it. Was told it would cost too much money by my partner. My question is how would you guys handle this situation enclosure or typical panel thanks

 

[480sparky]

Are they all branch/feeders, or is the 3" the service?

 

[billdozier]

the 3in is a feeder(?) coming from the original service located on the original house

 

[buddhakii]

You might take a look at the wire size versus pipe size. Maybe you can use a gutter and downsize the conduits.

 

[billdozier]

budd that was one of my other thoughts especially with what smart just helped me remember in the other part of this thread thanks for the sugesstion Knowing my partner and boss well end up with a jacked up looking panel no gutter or enclosure oh well thats why I want to get everyone elses opinion so I know the more correct or tradesman way of doing this application