Torque of main lugs on a 225A SqD panel NQOD

[solis]

I just got turned down from an inspector for not having a torque wrench with me to show the torque of main lugs at a panel I replaced. My mistake, he had a right to ask. He was nice enough but now need to re-inspect the lugs tomorrow, bring the wrench and show the torque. I have been looking in SqD but can't find the recommended torque settings. Anyone know or know where to look? It's a 225A main lugs only, NQOD bottom fed. Though it would be a snap to find but have looked all over the cut sheets, they give every other rating and dimension but can't find it. Probably staring at it. Other panels show 60-65lbs. Opinions?
Thanks in advance

 

[ActionDave]

It will be on a sticker inside the panel somewhere and will say something like Lug Torque Data. I'm sure the same thing is available online.

 

[qcroanoke]

I just got turned down from an inspector for not having a torque wrench with me to show the torque of main lugs at a panel I replaced. My mistake, he had a right to ask. He was nice enough but now need to re-inspect the lugs tomorrow, bring the wrench and show the torque. I have been looking in SqD but can't find the recommended torque settings. Anyone know or know where to look? It's a 225A main lugs only, NQOD bottom fed. Though it would be a snap to find but have looked all over the cut sheets, they give every other rating and dimension but can't find it. Probably staring at it. Other panels show 60-65lbs. Opinions?
Thanks in advance

Probably somewhere inside the panel.
usually on a stick on label.
maybe even on the lug itself

 

[solis]

I'll look, I know the breakers have it, looked in the panel but didn't see it. Thanks

 

[Mouser]

If you have the 2014 NEC, Annex I will give you your torque values.