Transition Coupling

[Alwayslearningelec]

What would you use to go from pvc 80 to pvc coated rgs? It's a transition to a pvc coated rgs elbow if that matters. Would imagine whether straight run or elbow transition it's same part. Thanks.

 

[ptonsparky]

I would use a PVC female adapter.

 

[Rick 0920]

Using a 3/4" Robroy coupling would protect any exposed threads and conduit. Then you could just screw a 3/4" PVC MA into the coupling.

 

[ptonsparky]

On a side note I've seen a heck of a lot more broken TAs than FAs.

No doubt you will have the stuff to paint the threads, so paint.

Neither method is a project killer. It would be which one do I have on the truck or shelf.