sparky_pdx
Member
So this was really weird today, not sure how to explain it. Trimming a new house, had installed 2 of these:
http://www2.panasonic.com/consumer-...ans/model.FV-11VQL4_11002_7000000000000005702
They have 2 quad CFLs & lil incadescent night light. The CFL work fine in one
& nothing in the other. If I move the bulbs from the bad one to the good one, they don't work. Then put the good bulbs back in the good fan & they didn't work till about 10 minutes later. Its really strange. Could a bad bulb do weird things to the good fan ballast? Is there a way to trouble shoot voltages? Or the bulbs themselves? I dunnoooo...
Any suggestions welcome,
thanks
http://www2.panasonic.com/consumer-...ans/model.FV-11VQL4_11002_7000000000000005702
They have 2 quad CFLs & lil incadescent night light. The CFL work fine in one
& nothing in the other. If I move the bulbs from the bad one to the good one, they don't work. Then put the good bulbs back in the good fan & they didn't work till about 10 minutes later. Its really strange. Could a bad bulb do weird things to the good fan ballast? Is there a way to trouble shoot voltages? Or the bulbs themselves? I dunnoooo...
Any suggestions welcome,
thanks