two motion sensors

[Ponchik]

Can two motion sensors located at two different location control one load (lighting fixture)?

Thanks

 

[ActionDave]

Yes, it's possible.

 

[Fulthrotl]

Can two motion sensors located at two different location control one load (lighting fixture)?

Thanks

yes. hook them in parallel. any motion from either one
will keep the light on.

(it's a good idea to keep them on the same phase.)

 

[goldstar]

(it's a good idea to keep them on the same phase.)

That would be one hell of a light show wouldn't it ?

 

[Dennis Alwon]

I find it easiest to run it as I do my 3 way switches. I feed one senor then run a 3 wire to the other sensor. From there a 2 wire to the light. Red wire is switched wire

 

[Ponchik]

Thanks guys. I will try it.

 

[kwired]

It is done in corridors or other spaces that are larger then the coverage area of the sensor all the time.

 

[Fulthrotl]

That would be one hell of a light show wouldn't it ?

it's not as exciting as most of the magic smoke is inside the j boxes....