gulf0927
Member
- Location
- Lehigh Valley, PA
Hey guys! Long story short, wiring an Abdul fire suppression system for a small deli. Non-addressable system, so probably just going to be a a few smokes, a couple pull stations, and 3 horn strobes. I'm a little new to fire alarm wiring. Basically one of the Ansul micro switches will operate the intake and exhaust fans, and the other will kill the lights and receptacles under the hood. When that micro switch activates, I need it to activate all the fire alarms. So I'm not quite sure how to run this back to the fire control panel, as I will have 120v at the micro switch when the suppression system is activated. Any help with how to accomplish this?