fayc11
Member
- Location
- plymouth ma
Good Morning
I have a Cath Lab, all the circuits within the Cath Lab are fed from the theLine Isolation Panel.
What was also done was that all the receptacles for the control room room(area outside the actual Cath lab) were also wired from the Line IsolationPanel. These receptacles in the control room have portable UPS's plugged intothem which feed computers, monitors etc..
I am up to 4 + MA right now, Threshold is 5MA
My question is why does the receptacles in the “controlroom” have to fed off of the Line Isolation Panel, when I shut the control roomreceptacles off, The MA goes way down.
Thank You.
I have a Cath Lab, all the circuits within the Cath Lab are fed from the theLine Isolation Panel.
What was also done was that all the receptacles for the control room room(area outside the actual Cath lab) were also wired from the Line IsolationPanel. These receptacles in the control room have portable UPS's plugged intothem which feed computers, monitors etc..
I am up to 4 + MA right now, Threshold is 5MA
My question is why does the receptacles in the “controlroom” have to fed off of the Line Isolation Panel, when I shut the control roomreceptacles off, The MA goes way down.
Thank You.