Limart
Member
- Location
- New York Metropolitan Area
Forgive my first clumsy post, but my usual experts are stumped on this one:
Measured existing lighting load at breaker = 8.7A
Measured existing Voltage to said breaker = 90V
(Unknown as to whether voltage was stepped down on purpose or if something else is wrong)
(Unknown specific light fixtures and wattages. Site surveys are difficult to schedule.)
Question: Should the voltage be restored to 120V to the breaker, what becomes of the load should the fixtures remain the same? Is there a calculation to determine this?
Thank you in advance for your assistance.
Measured existing lighting load at breaker = 8.7A
Measured existing Voltage to said breaker = 90V
(Unknown as to whether voltage was stepped down on purpose or if something else is wrong)
(Unknown specific light fixtures and wattages. Site surveys are difficult to schedule.)
Question: Should the voltage be restored to 120V to the breaker, what becomes of the load should the fixtures remain the same? Is there a calculation to determine this?
Thank you in advance for your assistance.