• We will be performing upgrades on the forums and server over the weekend. The forums may be unavailable multiple times for up to an hour each. Thank you for your patience and understanding as we work to make the forums even better.

Walk in freezer wiring

Learn the NEC with Mike Holt now!
Status
Not open for further replies.

bryant097

Member
Location
new jersey
My question is in the past I wired a walk in freezer with brining a feed for the compressor and then a separate feed to a tine clock which then runs to the evaporator fans. This one I am about to wire looks like you bring a feed just your feed to the compressor which hits the tine clock also and you just bring the control from the tine clock located in the compressor to the fans . Does this make sense ? So I would just bring my feed to l1 and l2 on the compressor then run my 4 control wires to the fans and that it.
 

Attachments

  • 674F4CFA-6132-43E0-9C7E-ABFC0C80E542.jpeg
    674F4CFA-6132-43E0-9C7E-ABFC0C80E542.jpeg
    129.4 KB · Views: 21
Status
Not open for further replies.
Top