weatherproof covers on switches/recept.

Status
Not open for further replies.
Here are the definitions of locations damp and wet from the NEC.

Location, Damp. Locations protected from weather and not subject to saturation with water or other liquids but subject to moderate degrees of moisture. Examples of such locations include partially protected locations under canopies, marquees, roofed open porches, and like locations, and interior locations subject to moderate degrees of moisture, such as some basements, some barns, and some cold-storage warehouses.

Location, Wet. Installations underground or in concrete slabs or masonry in direct contact with the earth; in locations subject to saturation with water or other liquids, such as vehicle washing areas; and in unprotected locations exposed to weather.

Chris
 
Is a military barracks bathroom (showers, toilets) considered a wet/damp location. If so should weatherproof covers be installed.

Is your bathroom classified as a wet/damp location, and do you have wp covers installed?
 
Status
Not open for further replies.
Top