B brettmc New member Feb 19, 2004 #1 Is welding cable (EPDM jacket, 600volt, 105 degree C to -55 degree C) acceptable to be installed in switchgear or motor control cabinets per the NEC?
Is welding cable (EPDM jacket, 600volt, 105 degree C to -55 degree C) acceptable to be installed in switchgear or motor control cabinets per the NEC?
dereckbc Moderator Staff member Location Plano, TX Feb 19, 2004 #2 Re: welding cable As long as it is listed like RHH/RHW
