I am Ron_B and would like to say "Hello" to all the members of this site. I'm kind of new at a lot of this so I would appreciate all the help I can get from all of you. My problem is that I have a convection heater with a built-in thermostat but it is located in a hard to reach area. I have a spdt thermostat that I would like to wire remotely to control this heater. What should I do?
wiring a remote thermostat
- Thread starter Ron_B
- Start date
- Status
- Location
- Chapel Hill, NC
- Occupation
- Retired Electrical Contractor
I am closing this thread, in accordance with the Forum rules. This Forum is intended to assist professional electricians, inspectors, engineers, and other members of the electrical industry in the performance of their job-related tasks. However, if you are not an electrician or an electrical contractor, then we are not permitted to help you perform your own electrical installation work.
If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
button at the top right corner of the post.
If I have misjudged the situation, if for example this project is related to your work, then send me a Private Message. If you can show me that I am wrong, and that you are a licensed electrician (or at least a licensed apprentice), then I will reopen your post, and offer an apology for the delay and inconvenience.
A reminder to all members, if you see a questionable post, feel free to report it by clicking the
- Status