working up price for resi meter stack

[AC\DC]

There are none available, that are a complete unit. Is everyone just using a Gutter and single meter socket? Can't believe they have not caught up with this https://www.platt.com/p/0393782/eat...ing-style-120-240vac/786849052416/cut1mp6126r

 

[letgomywago]

We were told 9 months from them. Have you checked Siemens and square D gear?

 

[letgomywago]

Siemens WP6511 120/240 VAC 600 Amp 1-Phase 3-Wire Overhead/Underground Feed Direction Meter Center | North Coast

Siemens Low Voltage s Multi-Family Metering Line of PAK Metering Standard 125A as part of the PAK Metering Standard 125A Group. Type UNI-PAK Features NO BYPASSAppn GARDEN - STYLE Std UL-50,67,414 V. Rating 120/240V A. Rating 600A Phase 1PH Size 9.000x45.07 x 39.690 No. Of Cutouts 17 Cutout Size...

www.northcoast.com

Tacoma has one right now

 

[AC\DC]

ill call them tomorrow!

 

[Fred B]

The issue of supply chain shortage is not the same as prior issues. This one came about as a result of code requirement change that each set of a meter/disconnect conductors must be in an isolated compartment. Haven't seen any new form of this multimeter stack setup that would meet the new requirement. So even if you are in an area that doesn't have that code requirement yet you will be impacted by it. Haven't seen any mfg. making one to meet 230.62 and 230.71(B)(3) as a conditions.

 

[letgomywago]

The issue of supply chain shortage is not the same as prior issues. This one came about as a result of code requirement change that each set of a meter/disconnect conductors must be in an isolated compartment. Haven't seen any new form of this multimeter stack setup that would meet the new requirement. So even if you are in an area that doesn't have that code requirement yet you will be impacted by it. Haven't seen any mfg. making one to meet 230.62 and 230.71(B)(3) as a conditions.

Oregon amended this out for now. Even emergency disconnects were removed.

 

[Fred B]

Oregon amended this out for now. Even emergency disconnects were removed.

May be true but the supply chain and Mfg. is still being impacted by the newer code, even if you don't need the newer equipment designs. Seeing same here.

 

[AC\DC]

I owe you, I’ll have it tomorrow. Need anything let me know

 

[letgomywago]

I owe you, I’ll have it tomorrow. Need anything let me know

Glad you got one we're all good thx.