I was trying to explain 110.14C to a friend and he came up with the question below.I did not have an answer,so,,,,,,,,
Question
If we are going to be limited in cable selection by the temp rating of 75 degree C of the termination,why do we even have 90 degree C column in Table 310.16?The fact that this column can be used for adjustment factors certainly is not the only reason.
dick
Question
If we are going to be limited in cable selection by the temp rating of 75 degree C of the termination,why do we even have 90 degree C column in Table 310.16?The fact that this column can be used for adjustment factors certainly is not the only reason.
dick