1st stand by generator w/pics

[stickboy1375]

I believe the installation manual says to use copper conductors. Does this mean all the way or Just in the wip from the Jbox outside to the generator?

Just at the termination point inside the generator...

 

[mark32]

Hey Hillbilly, today I did some research and found that the t-stat cable I normally get is a CL2 rated cable, 150v's, but there is a CL3 t-stat cable available that's rated at 300v's so that, as far as I can tell, should work in the scenario I presented.

Upon further research I do believe my thoughts on using class 3 t-stat cable is incorrect. Looks like I would have to use romex or pipe in some thhn.