skorper
Member
- Location
- Orange County, California
Does MC cable follow the same rules as NM cable when it comes to 'bored' holes (in wood framing)?
300.4 says to have a minimum of 1 1/4" from hole to stud side. (Unless you use a nail plate.)
It also says that rigid, intermediate, and emt are exempt.
It says nothing about MC.
At this, I would assume that MC is treated the same as NM. Am I correct in my assumption?
300.4 says to have a minimum of 1 1/4" from hole to stud side. (Unless you use a nail plate.)
It also says that rigid, intermediate, and emt are exempt.
It says nothing about MC.
At this, I would assume that MC is treated the same as NM. Am I correct in my assumption?