Thanks a lot guys, this means so much to me. First of all, the guy I am working with is a complete prick and will not explain anything to me. He has no patience and I have told the boss about it and the boss is trying to get me to work with the other guys but I find myself still working with the master electrician. For instance, he had 4 wires the same gauge and color or so runs of wire going down conduit from an AC service panel on the roof to a breaker in a commercial environment that I had rolled out. He grounded two (which were different gauges) of the wires and I asked him how he would know which wire goes to which, and he replied that it doesn't matter, then he proceeded to test continuity for each wire. After he tested the continuity, he put tape on the wire to identify the colors. I asked him why he did this if it doesn't matter and he looked at me like I was stupid. It just didn't make sense because he could have just put tape on a 30 foot run of wire for 5 different wires to make it easier. Every situation that we are in, this is how he reacts but I have a deep desire to learn this stuff but it is hard with him being the way he is. The boss knows how he is but they keep him because he is good at what he does. The electrician tells me things like the company is so screwed up where I work at and I ask why he stays and he says that they take care of him. He is not licensed but he is a master electrician... some things don't make sense and it is fishy to me. Nonetheless, I am still there because I want to learn the trade and I love what I do.