Question- is a overcurrent devise or service disconnect required in this application. subdivision entrance exterior panel for lighting-
SE cable comes out of the meter can and into the MLO panel. opening for up to 8 breakers. only breaker installed is for lighting (30amp)
my opinion there in no disconnect, no over current devise, no way to turn panel off unless metter is pulled.
(i have a picture )
SE cable comes out of the meter can and into the MLO panel. opening for up to 8 breakers. only breaker installed is for lighting (30amp)
my opinion there in no disconnect, no over current devise, no way to turn panel off unless metter is pulled.
(i have a picture )