luckylerado
Senior Member
- Location
- Lake of the Ozarks
I am looking over a set of drawings. The design engineer indicates installing single strand #12 AWG conductors for 120V controls of several new constant current regulators in a regulator station. The path indicated is a 3"x9" ladder tray with transitions at each end to EMT.
I do not doubt that I can install the wire on tray but what are my options for an appropriate transition to EMT on each end?
Any suggestions would be appreciated.
I do not doubt that I can install the wire on tray but what are my options for an appropriate transition to EMT on each end?
Any suggestions would be appreciated.