a swimming pool is going in ground. it is already dug and the steel is in place. there is a power company pole about 10 feet away from the pool. they have 3 support cables comming down to support the wooden power company pole and there are 3 rods driven into the ground that land 4'6" from the pool water. art. 680.26.(7) says any metal parts within 5' of the pool must be bonded. inspector says do not bond it and there is nothing in the code from preventing them from doing this. since the power company rods are bonded at the pole and at the neutral at the transformer seems like a hazard. power company was on site and said they have no problem with it. does anyone have any thoughts on this?