Who took the safe out of "Safety Switch"?

[chris kennedy]

The SO you see is the load side to the equipment. Be very careful changing these fuses. Any other code violations here?

 

[Flex]

I just got a headache trying to figure out what the wires under the wirenut do...

 

[480sparky]

That means the handle does not turn power off to the fuses.

Not to mention two of the three fuses are installed incorrectly.

Also, there's a unclosed KO in the bottom right.

 

[Pierre C Belarge]

You just have to love ingenuity.

 

[480sparky]

You just have to love ingenuity.

That's not ingenuity, Pierre.... that's ignorance.

 

[chris kennedy]

I just got a headache trying to figure out what the wires under the wirenut do...

This is typical of a 3? freezer where the 2 other wires feed the fan in the walkin.

That's not ingenuity, Pierre.... that's ignorance.

Agreed, this kind of stuff really gets under my skin.

 

[Jraef]

I don't know of any fused disconnects that are rated for bottom feed.

The SO cord is passing through a KO with no fitting.

Looks like the ground wire is connected to the neutral bar instead of a ground lug.

Not sure if those lugs are rated for multiple conductors.

No pride of workmanship exhibited...

 

[eric9822]

What a mess!

 

[480sparky]

........Agreed, this kind of stuff really gets under my skin.

But it sure helps in getting into your wallet with some money, though.

 

[Cow]

Wiring a disconnect correctly is tough, right up there with rocket science!

 

[cadpoint]

What is the off color to Brass fitting next to actual disconnect, is that the
thermal loads/ disconnect, thats hot by the way!

I don't know is that just the mechanical door, I'll assume not, as it has a throw blade...

 

[chris kennedy]

It is the door locking mechanism.

 

[PetrosA]

I thought maybe with the red and green under one screw this may be for Christmas lights. I guess not.

 

[hurk27]

I don't know of any fused disconnects that are rated for bottom feed.

The SO cord is passing through a KO with no fitting.

Looks like the ground wire is connected to the neutral bar instead of a ground lug.
Not sure if those lugs are rated for multiple conductors.

No pride of workmanship exhibited...

Looks like the SJO cord is connected to the phase conductors no ground, no neutral?

 

[cadpoint]

Sometimes its just another trade, most times it shows no respect for the application be it on a monday or a friday afternoon, Who know's...

But just Sad just the same!