Is there a code in the NEC stating the location of the main diconnect for the elevator power / control panel not the disconnect for the cargo lights or outlet. I was told it has to be located within 36 inches of door entrance, I thought it was within site. Is 36 inches a elevator code.
elevators
- Thread starter Big Guns
- Start date
- Status
- Location
- Massachusetts
It's an elevator code requirement, not NEC.
dcspector
Senior Member
- Location
- Burke, Virginia
Just follow NEC 620.51 There is nothing in ASME 17.1 Elevator Code regarding the 36" Must be a Local thing. Did you ask for a code reference NEC or ASME 17.1?
- Location
- Massachusetts
dcspector
Senior Member
- Location
- Burke, Virginia
Where? Not in NEC, ASME 17.1 or the IFC....:-?
- Location
- Massachusetts
I work in MA, CT & RI, all three have 'by the door' requirement.
- Location
- Massachusetts
and it better be on the latch side not the hinge side or you will be moving it.:roll:
resistance
Senior Member
- Location
- WA
dcspector
Senior Member
- Location
- Burke, Virginia
I simply gave an answer for the OP......Bob I really dont care how many states you work can you provide us with a code reference on the 36" from the OP?
dcspector
Senior Member
- Location
- Burke, Virginia
Isn't that nice
What contribution to this thread was that all about?
- Location
- Massachusetts
Gee, sorry I don't own an elevator code book and you know me, I never provide code references:roll: but whats with the 'tude?
resistance
Senior Member
- Location
- WA
It?s clearly a compliment!! Complimenting Iwire?s level of experience in more than one area. Obviously, you are taking this personal. It's ok to be wrong!! We are all ears (at least I am) if you feel you are right!!! But trying to knock my compliment doesn't convince this audience!
resistance
Senior Member
- Location
- WA
Exactly!!
Must be having a bad day! We all have them!!
Last edited:
Rewire
Senior Member
- Location
- Lake of the Ozarks
why we don't need any jockularity this is a serious forum
dcspector
Senior Member
- Location
- Burke, Virginia
Gee, sorry I don't own an elevator code book and you know me, I never provide code references:roll: but whats with the 'tude?
Bob you and I have been friends and Foes for as long as I have been on this site. All I was saying is that there is nothing in the ASME 17.1 regarding the OP'S question. Bob is this a common requirement? Here in DC it is not, but I have "hear say" that it is. However, No one has proven the requirement.
Rewire
Senior Member
- Location
- Lake of the Ozarks
I think that this may be one of those rules that has been repeated often enough it is taken for granted that it is true
resistance
Senior Member
- Location
- WA
dcspector
Senior Member
- Location
- Burke, Virginia
Rewire......Agreed.
Awg-Dawg
Senior Member
- Location
- Dayton Ohio
Sorry don't know of a requirement, but we always put by the door also.
On that line, I cant think of a logical reason why it should be by the door.
- Status