1/C #750 DC Splice

[Alwayslearningelec]

Have (4) 1/C #750 DC cables that need to be spliced to each other….leg to leg. 1/C 750 to a 1/C 750.

Don’t have spec to reference but was curious what others would deem good to use e.g. mechanical or compression with heat or cold shrink? Thanks.

 

[oldsparky52]

I'm not familiar with a DC cable, is this a cable you are using on a DC circuit or is that the cable type? What's the stranding?

 

[oldsparky52]

My personal preference for that size (750) would be compression butt splices.

 

[Alwayslearningelec]

I'm not familiar with a DC cable, is this a cable you are using on a DC circuit or is that the cable type? What's the stranding?

On DC Circuit.

 

[Alwayslearningelec]

My personal preference for that size (750) would be compression butt splices.

I agree.

 

[don_resqcapt19]

I always go to a compression connector if there is any possible way that I can do that. For this it would be a compression butt splice with heat shrink.

 

[Todd0x1]

out of curiosity, what is the application?