FS box

[wireday]

Do they make FS 4square boxes with 1/2 and 3/4 holes? I know they did at one time. jghdsuiwdshwluqkdshluakwuHDSUwhuksdjhwqjkdsughughdukskj,wGDJgwsujkwGDSLUwguwdgugqwludguwdiwqgidyqOW;dudp/lihgLIK.ICHG;UOkolkwdg;OWDHGUOwgdgqKWDGOUhqkw.dugiwkqgikqwgidkqgwlikdlgiqwkgduKHqguwaidguiowuDHOwhdyguiwqudywqdgowgoq;gDIOWGUgdu

 

[Jake@01]

Yup, sure do .

Sent from my SM-S906U using Tapatalk

 

[wireday]

Yup, sure do .

Sent from my SM-S906U using Tapatalk

OK, thanks, do you know which manufactor makes them

 

[Jake@01]

I believe steel city. I'm sure there r more. Just ask the local supply house & specify half & 3/4 ko's. It's a very common product. They're the only 4sq deep boxes that I use.

Sent from my SM-S906U using Tapatalk

 

[LarryFine]

By FS, you mean cast boxes with threaded hubs, right? If you can't find any, you can use 3/4 x 1/2 reducers.

 

[Little Bill]

Do they make FS 4square boxes with 1/2 and 3/4 holes? I know they did at one time. jghdsuiwdshwluqkdshluakwuHDSUwhuksdjhwqjkdsughughdukskj,wGDJgwsujkwGDSLUwguwdgugqwludguwdiwqgidyqOW;dudp/lihgLIK.ICHG;UOkolkwdg;OWDHGUOwgdgqKWDGOUhqkw.dugiwkqgikqwgidkqgwlikdlgiqwkgduKHqguwaidguiowuDHOwhdyguiwqudywqdgowgoq;gDIOWGUgdu

Do you mean 3/4 and 1/2 in the same box?

 

[wireday]

Do you mean 3/4 and 1/2 in the same box?

Yes, Cast box, with both 1/2 & 3/4 thread holes.

 

[Little Bill]

Yes, Cast box, with both 1/2 & 3/4 thread holes.

Never saw one. All the ones I see/use here are either 1/2" or 3/4", not a combo.

 

[electrofelon]

By FS, you mean cast boxes with threaded hubs, right? If you can't find any, you can use 3/4 x 1/2 reducers.

View attachment 2560250

Just did that a couple days ago, had three quarter coming in and half inch seal tight going out, reducing bushing saved the Day.