mc cable

[domnic]

Can i run mc cable in conduit ? ??????????????????????????????????????????????????????????????????????????

 

[LarryFine]

Simple answer is yes, but how would you terminate the sheath?

 

[infinity]

Is the conduit just a sleeve or complete between pull points?

 

[scrubbin]

What about using this type of fitting at the end of the EMT?

Bridgeport

Superior Fittings Superior Engineering Inquire About Bridgeport Fittings

www.bptfittings.com

1/2 inch EMT set screw combination coupling to 3/8" AC/MC/MCIA & FMC

Mighty-Merge® Transition fitting for use between 1/2 inch EMT to 3/8 inch FMC, metal clad and armored cable assemblies with O.D of .43 to .61 (14/2 to 10/3 within the specified ranges). AC/MC should be prepared to the desired length and fed through the f

www.bptfittings.com

 

[roger]

Simple answer is yes, but how would you terminate the sheath?

Once the cable assembly is installed inside a raceway no special terminating is needed for the cable. It would be no different than installing NM in a raceway.

 

[domnic]

complete between pull points

 

[rbalex]

See Section 330.10(A)(7) and pay special attention to Section 330.24.

 

[domnic]

See Section 330.10(A)(7) and pay special attention to Section 330.24.

what nec cycle ?

 

[roger]

what nec cycle ?

2014 on.

 

[AC\DC]

What would be the benefit if it’s a complete raceway?