WP-Covers

[zooby]

In use covers seem to be "code" for anyplace a person would need a weather proof cover. So where are all these old school flip covers being installed?
Snarky replies welcome! I was asked by the Director here if we had to use those "bulky" covers. Yes was my response. TIA

 

[Knuckle Dragger]

Outdoors where there is a roof for one example.

 

[zooby]

Outdoors where there is a roof for one example.

thanks for that.

 

[retirede]

They also get installed when (not if) the bubble cover gets broken.

 

[electrofelon]

Recommend an Arlington in-box if possible:

Arlington | Low Profile IN BOX^® for Flat Surface Retrofit Construction

One piece, recessed electrical box with weatherproof in use extra duty cover for flat surfaces in existing construction. Non-metallic cover and base. Accepts most single gang wiring devices and uses standard indoor wall plates or a GFCI cover plate. Box and white cover are textured/ paintable...

www.aifittings.com

 

[Joethemechanic]

Recommend an Arlington in-box if possible:

Arlington | Low Profile IN BOX^® for Flat Surface Retrofit Construction

One piece, recessed electrical box with weatherproof in use extra duty cover for flat surfaces in existing construction. Non-metallic cover and base. Accepts most single gang wiring devices and uses standard indoor wall plates or a GFCI cover plate. Box and white cover are textured/ paintable...

www.aifittings.com

I like those. What is a good product for surface mounting? Those bubble covers drive me nuts, get broken anywhere there is even foot traffic

 

[Bill_F]

I've used a few of the TayMac expandable covers.
Still bulky in use, but slimmer when not in use.

https://www.lowes.com/pd/TayMac-1-Gang-Rectangle-Plastic-Weatherproof-Electrical-Box-Cover/1000478661

Not sure if approved.

 

[James L]

Receptacles in soffits/eaves get flip covers
Cabanas
Covered decks
Carports

 

[James L]

I've used a few of the TayMac expandable covers.
Still bulky in use, but slimmer when not in use.

https://www.lowes.com/pd/TayMac-1-Gang-Rectangle-Plastic-Weatherproof-Electrical-Box-Cover/1000478661

Not sure if approved.

That's become the go-to in my area, it seems. I like 'em

 

[Frank DuVal]

I too use the Arlington IN Box. I use the flip covers under roof, but still outside as noted above. It keeps the mud daubers from filling in the ground holes! Or whatever insect that likes to fill 1/4" or so holes with mud and youngins.

 

[brantmacga]

I like those. What is a good product for surface mounting? Those bubble covers drive me nuts, get broken anywhere there is even foot traffic

For surface I use P&S WIUCAST1


Sent from my iPhone using Tapatalk

 

[zooby]

Thanks all. Never know when someone has found a better or different product/method. This is a great place to reach out.

 

[Strathead]

I've used a few of the TayMac expandable covers.
Still bulky in use, but slimmer when not in use.

https://www.lowes.com/pd/TayMac-1-Gang-Rectangle-Plastic-Weatherproof-Electrical-Box-Cover/1000478661

Not sure if approved.

It is listed for in use, so it is approved.