Alwayslearningelec
Senior Member
- Location
- NJ
- Occupation
- Estimator
So if you have area with a bunch of receptacles circuits I'm curious when one would switch from pulling multiple neutral MC from homerun box by electrical closet to area where loads are.
Yes I understand after 9 CCC's you would need to use #10. So for say 6 circuits would you pull #10 MC w 6 hots & 6 Neutrals + ground or would you run out a 1" EMT with wires. Same for 7 and 8 circuits. Not sure what determines when would use one method over another. Thanks.
Yes I understand after 9 CCC's you would need to use #10. So for say 6 circuits would you pull #10 MC w 6 hots & 6 Neutrals + ground or would you run out a 1" EMT with wires. Same for 7 and 8 circuits. Not sure what determines when would use one method over another. Thanks.