Occupancy Sensor Question

[kwired]

The two terminal will work fine, you just have to power a relay that has a dry contact, and put it in the right place of the circuit. Those that don’t understand controls though, will have a hard time figuring it out.

Yes it would, you basically of are creating a 4, 5 or even 8 terminal timer out of multiple components.

 

[Bob49]

Yes it would, you basically of are creating a 4, 5 or even 8 terminal timer out of multiple components.

So a dry contact delay on relay wired before the siren would allow the delay needed on power up, but no delay if sensor is triggered?

 

[hillbilly1]

So a dry contact delay on relay wired before the siren would allow the delay needed on power up, but no delay if sensor is triggered?

Once the power up delay expires, yes. The contact is after the motion output, but before the siren.

 

[Bob49]

Once the power up delay expires, yes. The contact is after the motion output, but before the siren.

Thank you for that information.